We design it.
Designed properly. Checked part by part.
SkillAxis Dynamics is a hands-on engineering company for workshops, factories and technical businesses. Plant layouts and walkthrough films, machine design with finite-element checks, manufacturing drawings, CNC conversions and programming, workshop management software and MotorArmour motor protection, all from the team that does the work.
- Fixed price in writing before we start
- One team, start to finish
- You own the drawings, files and programs
- 3,300+
- job cards run through workshop software we built
- 3 days
- from engineering review to a redesigned, fully checked mechanism with client documents
- 1,100
- motors in the MotorArmour programme for one national distributor, started with a 2-motor pilot
- 82
- leads in one month from R2,599 of Google Ads spend
From a sketch to a working machine, in three minutes
One idea followed from the first pencil line through design, drawings, stress checks, machining, controls and software.
Real models, real films, real machines
Everything here comes from our own 3D models, films and photographs of real jobs. Clients are never named; the work speaks.
Machine design with FEA
A 60 t angle-flaring press: force sizing, 49 drawings, stress checks and a film in two days.
See the service →Products from concept to build guide
Bloomforge: a motorised five-mode hearth, 113 parts checked for fit in every mode, manufacturing guides and films, in four days.
See the service →Explainer animations from CAD
A VNT turbocharger explained, animated from our own 3D model.
See the service →Our own tool changer
ATC-12: twelve tools on a stepper-indexed turret, from concept to a working prototype.
See the service →Workshop management software
Job cards, inventory, warranty claims and reports, live in a workshop every day.
See the service →Build-ready design packs
A chain tensioner from reference to drawings, costing and films in one day.
See the service →
MotorArmour motor protection
Treated motors on a wash-down line, each tested and certified.
See the service →
Press and machine capacity reports
Is the press in the corner really 100 t? A report with the numbers, from photos and a measurement sheet.
See the service →What do you need fixed?
Pick the line that sounds like your week. Every service has a starting price on the page, and every job gets a fixed price in writing.
Need a build-ready design this week?
Design Pack
Model, drawings, flat patterns, BOM, costing, datasheet and a film of it working, checked part by part.
Planning a factory or a new line?
Plant Layouts & Walkthrough Films
Every machine placed and checked for flow, clearance and crane reach, then filmed for the board, the bank or the tender.
A press or jig with no known rating?
Machine Capacity Reports
From photos and a measurement sheet: model, hand calcs, finite-element check, the safe load and the setting to apply.
Job cards on paper and parts going missing?
Workshop Management System
The job card, inventory and workflow system a working turbo workshop runs on every day, set up for your workshop.
Motors dying from water and wash-down?
MotorArmour™ Motor Protection
Our motor protection treatment for harsh, wet environments. Every motor tested, certified and tracked by serial number.
Need drawings a workshop can build from?
Drawings, Reverse Engineering & Patent Sets
Manufacturing drawings, BOMs, reverse engineering of worn parts and formal patent drawing sets. From a sketch, a photo or the part itself.
Manual machine that should be CNC?
CNC Conversions & G-code Programming
Mill and lathe conversions, tool changers and production CAM programming, on CNC machines we built and run ourselves.
Nothing off the shelf does the job?
Custom Machinery & Equipment
Jigs, fixtures, test benches, presses and process equipment, designed and costed with design and manufacturing as separate fixed lines.
Old machine controls letting you down?
Machine Controls & Retrofits
Servo and stepper drives, VFD spindle control, tool changers, electronic lead screws and control panel layouts for existing machines.
Running the business on spreadsheets?
Websites & Business Software
Business websites from R1,500, and custom systems for inventory, bookings, quotes and invoices that staff actually use.
The phone isn't ringing enough?
Google Ads Management
Campaigns, landing pages and lead tracking, with a daily budget pacer and monthly reports. One client campaign brought in 82 leads last month at R31.69 each.
Work that is running right now
No invented testimonials. These are live systems, paying clients and numbers you can ask us to show you.
Workshop Management System for a turbocharger repair workshop
Turbocharger repair workshop, Pretoria
A busy turbocharger workshop ran job cards, parts and the wash-bay queue on paper and memory. Job status lived in people's heads, parts went missing, warranty claims were argued from memory and nothing could be reported on.
In production every working day. More than 3,300 job cards logged, over 20 users, and around 300 new jobs added every month.
Electric motors protected for high-pressure wash-down
National bearings and power transmission distributor
Motors on a food processing line were being replaced every one to two weeks because daily high-pressure wash-down destroyed standard motors. Stainless wash-down motors were the alternative, at a far higher price.
Pilot motors tested at more than 2,000 MΩ. The pilot turned into repeat orders and a programme of about 1,100 motors for its plants, each motor with its own numbered certificate and treatment record.
CNC machines built, programmed and kept busy
Turbomachinery workshop, Pretoria
Precision turbocharger parts needed in-house machining, and someone had to keep the programs and the parts coming.
Hundreds of production programs and parts: flange skimming, bearing housings, supercharger bearing pockets, balancing jigs and a custom grooving tool, machined on the converted machines every week.
82 leads in a month for a turbo parts distributor
Turbocharger parts distributor, Gauteng
The business needed a steady flow of enquiries on a small, fixed monthly budget without paying for junk clicks.
September 2026: 82 leads from R2,598.76 of ad spend, R31.69 per lead (down 14.5% on August), click-through rate up from 7.0% to 9.0%, and the month finished under the R3,000 ceiling.
From a WhatsApp photo to a finished job
Six stages, each with a fixed price, a check and a handover. The full version shows what you get, what we need and when you pay.
Send what you have
A photo, a sketch, a part number, an old drawing or a voice note on WhatsApp. You do not need a specification to start.
Scoping call and fixed price
A short call, or a site visit if something must be measured. We agree the governing dimensions, the loads, the finish and what done looks like.
Design, modelled and checked
We model from the agreed dimensions, and the drawings, lists and costing follow the model, so a change flows through the whole package. Every part is checked for clashes, fit, mass and envelope before you see it.
Release: the design is yours
Drawings and files are released in PDF, STEP and DXF. You can take them to any fabricator, or let us run the build.
Build, treat or install
Fabrication, machining, software setup or motor treatment runs against the quoted schedule. For larger builds we manage trusted fabricators and electricians for you.
Hand over and support
Commissioning, training and documentation: drawings, programs, manuals and certificates. If something is not right, we fix it.
One team for the whole chain
Most firms do one piece and hand the rest to someone else. We cover design, drawings, machining, controls and software, so nothing gets lost between suppliers.
You deal with engineers
No account managers and no hand-offs. The engineers who scope your job are the ones who design, draw, program or build it.
Fixed prices, not hourly rates
You get a fixed price in writing before work starts. Design, manufacturing and installation are separate lines, so you can see what each part costs.
We run what we sell
Our workshop software runs a real workshop daily. Our CNC work runs on machines we built. Our ads run for paying clients. Nothing here is theory.
You own the files
Drawings, 3D models, G-code and source files are handed over with the job. No lock-in and no holding your designs hostage.
- A turbocharger repair workshop
- A turbo parts distributor
- An industrial contractor
- Turbocharger workshops
- Parts distributors
- Steel fabrication
- Rail machinery
- Freight and logistics
- Agriculture
- Mining equipment
- Food processing
- Industrial bearings and motors
- Hospitality
Straight answers
Do you work outside Pretoria?
Yes. Drawings, CAM programming, software and Google Ads are done remotely for clients anywhere in South Africa. Machine and installation work is done on site, with travel quoted as its own fixed line.
I only have a sketch or a broken part. Can you still help?
That is how most jobs start. We work from sketches, photos, measurements and physical parts, and turn them into proper 3D models and manufacturing drawings.
How do you price?
Fixed prices only, never hourly. Each page lists a starting price so you know the ballpark before you contact us. Your written quote splits design, manufacturing and installation so you can see exactly what you are paying for.
Who will I be dealing with?
Engineers. SkillAxis is an engineering and software company with a team of specialists behind every job, so the engineer who scopes your job is the one who does it, and the drafting, documentation and reporting around it are done fast. For larger builds we bring in trusted fabricators and electricians and manage them for you.
Can I see the work before I commit?
Yes. Ask on WhatsApp and we will walk you through a live demo of the workshop software, sample drawing packages or campaign reports relevant to your job.
Tell us what you need built, drawn, fixed or found.
Send a photo, a sketch or two lines on WhatsApp. You will get straight answers, a realistic timeline and a fixed price, not a sales pitch.